Bardahl No Smoke

Bardahl No Smoke
Stop excessive oil consumption.
An extra-high-performance oil stabilizer to stop excessive oil consumption. These additives ensure a better seal between the piston and cylinder wall and improved compression. They also reduce engine noise, exhaust smoke, and oil consumption.

Always read the instructions on the label before adding this product. Do not add more than previously added, as this may have an adverse effect.

Product Information. No Smoke

Bardahl No Smoke is a super-thick, polymer-based oil additive for use in the engine oil of older cars. It is designed for engines that consume oil, experience compression loss, and/or smoke. The Problem: Oil consumption due to mechanical wear is one of the most common causes of oil consumption. As engines age, the piston rings and cylinder walls begin to wear. A space forms between the piston and the cylinder wall, allowing the oil to escape into the combustion chamber. This oil is partially combusted in the combustion chamber. The unburned portion creates exhaust smoke; this is a clear sign of significant wear. As the engine heats up, the oil (even multigrade) becomes thinner, and more oil will escape. This causes more smoke, carbon deposits, and fouled spark plugs. At the same time, fuel vapor and exhaust gases will escape past the piston rings (blow-by), resulting in a loss of compression and power. The effect: The Bardahl No Smoke additives simultaneously improve the performance of the engine oil at normal engine temperatures. A 15W40 multigrade oil becomes a 15W60 engine oil, which is ideal for older and worn engines. Its high strength at higher temperatures means the oil no longer escapes past the pistons into the combustion chamber and burns there. This is not possible with a regular engine oil without Bardahl No Smoke additives. Bardahl No Smoke fills the tolerances of all moving parts of the engine and reduces engine noise. The engine oil provides good sealing and improves the engine's compression and performance. The result: • Reduced exhaust smoke • Reduced oil consumption • Reduced engine noise • Restores compression • Improved power and performance.

Instructions for use: Replace 10% of the engine oil with Bardahl No Smoke at each oil change. In extreme cases, up to 20% can be added. It is best to add Bardahl No Smoke to warm engine oil. Ensure the engine oil does not exceed the maximum oil level. Bardahl No Smoke is safe for use in gasoline, LPG, and diesel engines and will mix easily with any mineral, semi-synthetic, or fully synthetic oil. Men can also add Bardahl No Smoke between changes if necessary. The extra-thick formula of Bardahl No Smoke is easy to see by inverting the bottle. You will then see the air bubble slowly rise to the top. Bardahl No Smoke is safe for catalytic converters.

Article number: 2116US

Contents: 473ml